Custom Install

Quick Product Finder

RB-1650BT 6.5" In-Ceiling Active System with Bluetooth®

The RB-1650BT is a 2 x 30W RMS active speaker paired with a passive one.
The system is a perfect solution for residential as well as commercial installations in restaurants, pubs, shops, conferencing rooms, fitness clubs, teaching rooms.

It allows to build a cost-effective audio installation and stream music wirelessly via Bluetooth® (music and the Internet radio) or wired via additional stereo line input (RCA / 3.5mm).
Unique features like remote control, front and rear IR receivers, RS-232 port, programmable Auto Standby and Bass / Treble regulations help to integrate the RB-1650BT into any audio-visual installation. 
The daisy-chain connection allows to connect many pairs of RB BT speakers to the main speaker and build a very large and sophisticated AV installation.

The sound is clear, natural, dynamic and provides wide dispersion throughout a listening area, and thanks to slim bezels you are hard to see speakers mounted in your wall or ceiling!


The proper design facilitates installations thanks to many specialized features:


  • Built-in high-efficiency 2 x 30W RMS amplifier: low working temperature (Class D amp) and external power supply allows for placement in closed areas;
  • Bluetooth® 4.0 wireless connectivity: stream music and the Internet radio from smartphones, tables or computers;
  • Auto-Switching: automatic or manual Bluetooth® input selection;
  • Bass and Treble regulation;
  • Additional RCA stereo line input: to connect analog sources (CD player, TV tuner etc.) – RCA and 3.5mm;
  • Auto Standby: the amplifier switches on when the audio signal is sensed and switches off after approximately 30 minutes of inactivity (can be switched off from the remote controller);
  • Remote controller (ON/OFF, Bluetooth and Line, Bluetooth priority ON/OFF, Auto Standby ON/OFF, Volume and Mute, Bass / Treble / Reset);  
  • Programmable IR front and rear receivers: the rear IR receiver is dedicated for a wired control system;
  • RS-232 serial port: allows integration into a control system;
  • Daisy-chain connection: line output to pass the audio signal to the next RB BT speaker;
  • Slim chassis to allow installations even in shallow places;
  • Volume and tone memory: set it and forget - the RB-1650 BT remembers the volume and tone regulation level selected before it was switched off;
  • TIMPC - TAGA Injection-Molded Polymer Chassis is very rigid and strong to minimize distortions, vibrations or resonances;
  • TEI – TAGA Easy Install mounting brackets are extremely easy and safe to install. The ABS clamps are in a visible blue color to ease installation in dark places;
  • Reduced Bezel grills are magnetically mounted and paintable. They are aesthetic and virtually disappear in the ceiling or wall;
  • Swivel tweeter to direct a high frequency stream toward selected area in the room; 
  • High quality sound: 1” TPTTD Taga Pure Titanium Tweeter Dome and 6.5” Kevlar® mid-woofer.


TechnologyView technology






Active System (1 active and 1 passive speaker)
Reduced bezel
Magnetically mounted grill
TEI mounting bracket
TIMPC enclosure

High-Frequency Driver: 25 mm (1”) TPTTD
Swivel mount 
Bass / Midrange Driver: 165 mm (6.5”) Kevlar® cone
Built-in Amplifier Power:

2 x 30W RMS / 110W Dynamic Peak,


S/N ≥  92dB

THD ≤ 0.2%
Frequency Response: 38Hz - 25kHz
Sensitivity: 89dB (1W / 1 m)
Input Sensitivity: 400mV (RCA / 3.5 mm)
Connectivity Wired: LINE IN stereo (RCA / 3.5mm)
Connectivity Wireless: Bluetooth® v4.0
Control & Features:

Remote controller:



Treble / Bass / Reset  
Bluetooth® priority

Auto standby ON/OFF

Auto Standby
IR front and rear receivers
RS-232 terminal (Phoenix connector)
Daisy-chain connection (3.5mm in / 3.5mm out)

Volume / Tone memory

LED indicators on the front panel
Included Accessories:

5 m active-passive speaker cable

DC adapter with 4-meter DC cable
0.5-meter detachable power cord


Remote Controller with battery
Power Requirements & Consumption:

AC 100-240V 50/60Hz; 70W

(external adapter 12 x 5.2 x 3.2 cm)
Dimensions: 23 x 9.5 cm
Minimum Mounting Depth: 130 mm
Cutout Dimensions (D or H x W): 198 mm
Weight: Active: 1.3 kg / Passive 1.2 kg
Finish: WHITE, PAINTABLE (with grill on)
(black front)





Facebook TAGAFlickr TAGAInstagramTAGA

We reserve the right to amend details of the specifications or designs 

without notice in line with technical developments.

Copyright © 2012/2018 Taga Harmony 

Created by

 Created by Quicknet.plQuicknet