Home Speakers
Floorstandings

Diamond F-200

Description
Specification
Finishes
Technology
Awards and Reviews
Videos
Downloads

The Diamonds are a Music Lover’s Best Friend!

After a tremendous success of Platinum Special Edition series we received a lot of requests from its customers for designing loudspeakers with even more high-end look and sound. 

We made a decision to take on that difficult but at the same time tempting task.

A team of dedicated engineers was appointed for this project which got a code name "Diamond".
Their goal was to use all the knowledge and experience in research, development and manufacturing of speakers to build an exceptional floorstanding speaker showcasing the best technology and achievements of TAGA Harmony. 

The result is visible at the first glance on the beautifully crafted cabinet with its curved, clear, elegant lines and luxurious design accentuated with high grade natural wood veneers finished with high-end clear gloss piano lacquer.

When you turn on the speakers you are immediately stunned by the exceptional Diamond F-200 sound - super natural, super dynamic, super clear and engaging... just super! Taste it, Immerse in it, Love it!

Why is TAGA Harmony DIAMOND probably the best in the World?


CARAT almost 110 kg weight of a pair. Very rigid, resonance-free cabinets!
COLOR exceptional, glittering real wood veneers. Simply charming!
CLARITY perfectly pure, transparent and natural sound!
CUT splendidly shaped enclosures with ideal proportions.
POLISH super glossy piano lacquer, jewelry at your home!

Design Floorstanding, 3-way, 4 drivers
Bi-wiring, bi-amp
S-TLIE enclosure
Crossover points: 450Hz, 4kHz
Power handling 100 - 400W (recommended amplifier power)
300W RMS
Frequency response 30Hz - 33kHz (±3dB)
Bassreflex Rear double
Impedance 6ohm
Sensitivity 91dB
High-frequency driver 30 mm (1.18”), O-TPTTD, E-TPAF
Midrange driver 165 mm (6.5"), E-TPACD
Bass driver 2 x 203 mm (8"), TNPPCD
Features / accessories Magnetically mounted grill
Dimensions (H x W x D) 120 x 28 x 52 cm (incl. base, excl. spikes)
Weight 56 kg / pc.
Real wood veneer colours
African walnut veneer with clear gloss piano lacquer African walnut veneer with clear gloss piano lacquer
Rosewood veneer with clear gloss piano lacquer Rosewood veneer with clear gloss piano lacquer

For color samples check:
Finish options sheet

DIAMOND Series

CABINET

 

 

 

Speaker cabinet design and construction is one of the most critical elements influencing sound performance.
Based on our TLIE – Taga Low Interference Enclosures technology TAGA Harmony have developed a new high-end solution to even more increase stiffness and limit any unwanted resonances of the cabinet.

The new technology is called S-TLIE Super Taga Low Interference Enclosures.


Super rigid and thick 25mm [F-200] or 18mm [B-60] MDF were used for walls and 30mm for the baffle in the F-200 (front panel).

The internal structure of the F-200 was divided in two chambers in an approximate ratio 80% of volume for woofers and 20% for a midrange and tweeter. It allows much better and independent tuning of the low and mid-high sections.

Internal bracing is used to further strengthen the whole structure and achieve even greater rigidity.
The walls are firmly anchored to the 80mm [F-200] and 75mm [B-60] backbone beam highly strengthening the whole construction.

The bent shape of the side walls as well as the curved top plays a significant role in lowering unwanted vibrations, diffraction, turbulences and standing waves effect.

The high-end African wood veneers painted with 9-layer clear piano lacquer is extremely luxurious and enduring.


To keep elegant and sleek appearance of the front panel there are no grill sockets thanks to a magnetic mountable grill. 


The F-200 cabinet sits on a 2-layer discrete metal base with oversized spikes. 
The 2-layer design increases isolation from the floor, the transparency of sound and provides better definition and the basis for the bass.

The whole cabinet is tilted back slightly to time-align all the drivers – it brings the tweeter’s output into the best and correct alignment.

Supplied extra aluminum spike supports (for the F-200) provide super stability for the speakers and protect the floor from being scratched.


HIGH-FREQUENCY DRIVER

1. Additional Φ70 magnet 
2. T-YOKE / Pole piece           
3. Oversized ferrite Φ80 magnet    
4. Top plate                          
5. 28mm CCAW and silver wiring voice coil
6. O-TPTTD (Oversized Taga Pure Titanium Tweeter Dome)
7. E-TPAF (Enlarged Taga Pure Aluminum Faceplate)
8. Metal grill

The high-end 30mm (1.18”) O-TPTTD (Oversized Taga Pure Titanium Tweeter Dome) is 20% bigger than in our Platinum Special Edition series to allow even higher power handling and more accurate, clear, smooth and detailed performance. Ferrofluid cooled and heavy duty 28mm CCAW and silver wiring voice coil as well as 2 magnets (Φ80 &   Φ70) help the tweeter to bear high power. It has exceptional precision and works with ultra-extended high-frequency response up to 33 kHz (+/- 3dB).

The E-TPAF (Enlarged Taga Pure Aluminum Faceplate) and metal grill helps even further dispersion of high-frequencies.



MIDRANGE DRIVER

1. Additional Φ90 magnet
2. T-YOKE / Pole piece                                                                           
3. Oversized Φ100 magnet
4. Top plate
5. Terminal
6. Aluminum injection-molded chassis with anti-oxidation surface process
7. Spider
8. Flat wire copper voice coil
9. E-TPACD (Extended Taga Pure Aluminum cone Driver)
10. Pure aluminum bullet shaped phase plug


The 165mm (6.5”) rigid and ultra-light E-TPACD (Extended Taga Pure Aluminum cone Driver) midrange (with a bullet shaped phase plug,  aluminum chassis and oversized 2-magnet structure Φ100/Φ90) with the butyl suspension can move very fast and frequently allowing mid-range frequencies to be very rich, spacious and sweet.
The still, bullet shaped phase plug is to align the phase of the audio signal and to smooth the midrange frequency response. The extended low and high frequency range (from 46 Hz – 18 kHz) helps overlapping with frequencies of the woofers and the tweeter to offer the best sound consistency and integration.



BASS-MIDRANGE DRIVER / BASS DRIVER

1. Additional Φ110 magnet [F-200 only]
2. T-YOKE / Pole piece                                                                           
3. Two oversized Φ123 magnets [One Φ120 in B-60]
4. Top plate
5. Terminal
6. Aluminum injection-molded chassis with anti-oxidation surface process
7. Spider
8. 4-layer pure copper ribbon voice coil
7. TNPPCD (Taga  Non-pressed Paper Cone Driver)
9. Non-pressed Paper dust cap

The two 203mm (8”) in F-200 and one 165mm (6.5") in B-60 TNPPCD (Taga  Non-pressed Paper Cone Driver) woofers – each equipped with oversized magnets (1 in B-60) and  aluminum chassis. They are extremely rigid and utilize vibration-free solutions. The heavy duty 4-layer pure copper ribbon voice coil allows high power handling. Our TNPPCD drivers offer deep, precise and detailed bass performance. Thanks to a larger surface area to push air – the sound can be played at much louder levels.


BASSREFLEX


BOM Bassreflex Omnidirectional Module (only the F-200) - low-turbulence and high-velocity ports utilizing concave diffusers for increased dispersion of low frequencies. Ports are rubber coated for more luxurious look and to provide even better effect on a sound performance.
 


B-60: Low-turbulence and high-velocity port provides exceptional dispersion of low frequencies.


CROSSOVER / INTERNAL WIRING

High quality, close-tolerance and precisely selected crossover components and internal wires for absolute sound neutrality, long-term high power and reliability.

TAGA Harmony utilizes the high quality of OFC internal wiring connecting crossovers with drivers assuring that incoming audio signals from a receiver or amplifier will not lose any important details on the paths to drivers.


BINDING POSTS

The high quality, gold-plated banana binding posts are accepting raw speaker cables up to 10AWG and most popular types of connectors. They offer bi-wiring and bi-amping for wider dispersions and spaciousness, higher sonic accuracy and more precise sound.

We use high-end 4N pure oxygen free copper wire jumpers terminated with gold-plated banana and spades connectors.

HI-FI CHOICE
HI-FI CHOICE
Diamond F-200
Download
HiFi Test (Germany)
HiFi Test (Germany)
Diamond F-200
Download
HiFi Test (Germany)
HiFi Test (Germany)
Diamond F-200 (DE)
Download
Stereo i Kolorowo
Stereo i Kolorowo
HTA-2000B v.2 + Diamond F-200
Download
Super AV (China)
Super AV (China)
Diamond F-200
Download
Diamond brochure 2019 v.1 Download
User manual Download
quanmedia