Home Speakers
Floorstandings

TAV-606F SE

Description
Specification
Finishes
Technology
Awards and Reviews
Videos
Downloads

Wind of Change!

The TAV-606F v.3 considered to be one of the best bargains both for hi-fi stereo and home theatre now is introduced in the Special Edition version to appeal towards even more advanced audio enthusiasts.

The main changes:

  • The midrange driver has a bigger magnet to provide higher sensitivity and better control of a voice coil. Now mids are more natural, live and rich.

  • 6.5” woofer utilizes more rigid and lighter cone structure and more flexible rubber surround. The magnet has grown from 80mm to 90mm as well as an extra one (80mm) has been added. Bass is extremely deep and accurate keeping great timing at the same time.

  • The revised crossover matches the revised drivers.

  • The same high-end internal wiring as in the high-end Platinum SE and CORAL series is used.

  • The same high-end damping material as in the CORAL series.
     

To emphasize the high-end affiliation of the SE edition  we are proud to show it outside:

  • Special Edition logo batch is located on the front panel.

  • The bassreflex port and terminal box are rubber coated.

  • The high-end binding posts same as in the CORAL series.

  • Elegant, black aluminum spikes underline unique character of the speakers.

Design Floorstanding, 3-way
4 drivers
Bi-wiring, bi-amp
TLIE enclosure
Crossover points: 650Hz, 4.5kHz
Power handling 20 - 150W (recommended amplifier power)
110W RMS
Frequency response 36Hz - 25kHz
Bassreflex Front single
Impedance 6ohm
Sensitivity 91dB
High-frequency driver 25 mm (1"), TWG
Midrange driver 133 mm (5.25”)
Bass driver 2 x 165 mm (6.5”)
Dimensions (H x W x D) 98 x 23 x 25 cm (excl. spikes)
Weight 15.1 kg / pc.
Vinyl colours
Black Black
Modern wenge Modern wenge
Oak Oak
Walnut Walnut

For color samples check:
Finish options sheet

TAV-606FCS SE - Special Edition

CABINETS
TLIE – Taga Low Interference Enclosures are made of high-quality MDF boards (Front speaker: 12mm thick PVC coated with 15mm painted front panel ; Center and Surrounds speakers: 9mm with 12mm painted front panel) to increase stiffness and limit any unwanted resonances.

The shapes are perfectly crafted not only to look wonderful and modern but mainly to lower any unwanted vibrations, diffractions or turbulences, which can affect the sound performance.



HIGH-FREQUENCY DRIVER

1. T-YOKE / Pole piece
2. Oversized ferrite magnet    
3. Top plate                          
4. Black silk dome
6-A, 6-B. TWG Front faceplate
8. Round wire copper voice coil

          
1” (25mm) silk dome tweeter with oversized Φ70 magnet, ferrofluid cooling and heavy duty voice coil can handle high power and its performance is very accurate, clear, smooth and detailed.
Specialized horn-like, TWG TAGA Waveguide design of tweeter's faceplate utilizing concave diffusers supports equal and flat dispersion of sound in and off the axis of the driver.


MIDRANGE DRIVER

1. T-YOKE / Pole piece                                                                  
2. Oversized ferrite magnet            
3. Top plate
7. Ferrum injection-molded chassis with anti-oxidation surface process
8. Round wire copper voice coil
9. Terminal
10. Spider
11. Yellow glass fiber cone and rubber surround
12. PP bullet shape dust cap

Rigid and ultra-light yellow glass fiber cone with the elastic rubber suspension can move very fast and frequently allowing mid-range frequencies to be very rich, spacious and sweet. Heavy duty voice coil and Φ80 magnet can stand high temperatures and power inputs. The dust cap in the form of bullet improves dispersion at higher range of mid frequencies.



BASS-MIDRANGE DRIVER

1. T-YOKE / Pole piece                                                                           
2. Oversized ferrite magnet            
3. Top plate
7. Ferrum injection-molded chassis with anti-oxidation surface process
8. Round wire copper voice coil
9. Terminal
10. Spider
11. Paper cone and rubber surround
12. PP bullet shape dust cap

Mid-woofer utilizing paper cone with Φ70 magnet and heavy duty voice coil and coil former for increased power handling, can play clear, rich and spacious mid frequencies. The dust cap in the form of bullet improves dispersion at higher range of low and mid frequencies.



BASS DRIVER
 
1. Additional Magnet
2. T-YOKE / Pole piece
3. Oversized ferrite magnet            
4. Top plate
5. Terminals
6. Ferrum injection-molded chassis with anti-oxidation surface process
7. Spider
8. Round wire copper voice coil
9. Paper cone and rubber surround
10. PP dust cap


Woofer utilizing paper cone, double magnet for woofer (Φ90/ Φ80) and heavy duty voice coil and coil former for increased power handling, can play deep, precise and detailed bass.


BASSREFLEX

BOM Bassreflex Omnidirectional Module - low-turbulence and high-velocity ports utilizing concave diffusers for increased dispersion of low frequencies. Ports are rubber coated for more luxurious look and to provide even better effect on a sound performance.


CROSSOVER
High quality, close-tolerance and precisely selected crossovers’ components and internal wires for absolute sound neutrality, high long-term power and reliability.


INTERNAL WIRING
TAGA Harmony utilizes high purity oxygen free copper OFC for internal wiring connecting crossovers with drivers assuring that incoming audio signals from receiver or amplifier will not lose any important details on the paths to drivers.


BINDING POSTS


High quality, gold-platted banana binding posts accepting raw speaker cables up to 10AWG and most popular types of connectors. 
High-end banana binding posts allowing bi-wiring are used in the floorstaning speakers for wider dispersions and spaciousness, higher sonic accuracy and more precise location.
The terminal box is rubber coated for more luxurious look.

HI-FI CHOICE
HI-FI CHOICE
TAV-606F SE
Download
Home Audio catalogue 2018 v.1 Download
User manual Download
quanmedia