TAGA  Harmony
Speakers
Floorstandings

TAV-616F

Archived product

Description

The TAV-616F speakers are based on TAV-606 technology with enhanced dynamic range and sound stage imaging to meet demand of premium multi-channel and stereo systems.

Key features:

  • TLIE (Taga Low Interference Enclosure) – new elegant enclosures are now even more rigid and neutral to vibrations and colorization. The increased MDF walls thickness compared to the TAV-606F: from 12 mm to 15 mm (and 21 mm thick front panel). Increased cabinet dimensions provide bigger internal volume and acoustic pressure reflecting in higher dynamics and lower bass.

  • Revised bass-midrange and bass drivers cones – now lighter with a higher SPL and faster, more accurate cone movement to quickly react to changes in dynamic sound passages.

  • New decorative pure aluminum trim rings to enhance sound dispersion.

The new TAV-616F speakers are dedicated for demanding home-theatre enthusiasts, who look for the best sound performance in their multi-channel systems as well as still love to enjoy hi-fi stereo sound. 

Specification

Design Floorstanding, 3-way
4 drivers
Bi-wiring, bi-amp
TLIE enclosure
Crossover points: 470Hz 3KHz
Power handling 20 - 160W (recommended amplifier power)
120W RMS
Frequency response 36Hz - 25kHz
Bassreflex Front single
Impedance 6ohm
Sensitivity 91dB
High-frequency driver 25 mm (1"), TWG
Midrange driver 165 mm (6.5")
Bass driver 2 x 165 mm (6.5")
Dimensions (H x W x D) 98 x 23 x 28 cm (excl. spikes)
Weight 17.15 kg / pc.

Finishes

Vinyl colours
Black Black
Oak Oak
Walnut Walnut
Wenge Wenge

Technology

TAV-616 FCS

CABINETS


TLIE – Taga Low Interference Enclosures are made of high-quality thick PVC coated MDF boards (front speaker: 15 mm full cabinet  with an extra 21 mm high gloss gloss black front panel. Center and Surrounds speakers: 12 mm full cabinets with an extra 15 mm thick high gloss  black front panel) to increase stiffness and limit any unwanted resonances.
The front speaker has additional inside braces made of 9 mm MDF boards.

The shapes are perfectly crafted not only to look wonderful and modern but mainly to lower any unwanted vibrations, diffractions or turbulences, which can affect the sound performance. Acoustical damping material used inside cabinets eliminates problem of internal standing waves and bass-reflex ports are uniquely designed to reduce distortions to minimum. 

The floorstanding model sits on solid spikes that provides stability and good isolation of speaker from the floor.



HIGH-FREQUENCY DRIVER

1. T-YOKE / Pole piece
2. Oversized ferrite magnet    
3. Top plate                          
4. Black silk dome
6-A, 6-B. TWG Front faceplate
8. Round wire copper voice coil

                         

1” (25mm) silk dome tweeter with oversized Φ70 magnet, ferrofluid cooling and heavy duty voice coil can handle high power and its performance is very accurate, clear, smooth and detailed. Specialized horn-like, TWG TAGA Waveguide design of tweeter's faceplate utilizing concave diffusers supports equal and flat dispersion of sound in and off the axis of the driver.


MIDRANGE DRIVER

1. T-YOKE / Pole piece
2. Oversized ferrite magnet
3. Top plate
4. Terminal
5. Ferrum injection-molded chassis with anti-oxidation surface process
6. Spider
7. Round wire copper voice coil
8. Yellow glass fiber cone and rubber surround
9. PP bullet shape dust cap
10. Trim ring support
11. Front pure aluminum trim ring

Rigid and ultra-light yellow glass fiber cone with the elastic rubber suspension can move very fast and frequently allowing mid-range frequencies to be very rich, spacious and sweet. Heavy duty voice coil and Φ80 magnet can stand high temperatures and power inputs. The dust cap in the form of bullet improves dispersion at higher range of mid frequencies.

Pure aluminum trim ring helps further dispersion of played frequencies.


BASS-MIDRANGE DRIVER /  BASS DRIVER

1. T-YOKE / Pole Piece
2. Oversized ferrite magnet            
3. Top plate
4. Terminal
5. Ferrum injection-molded chassis with anti-oxidation surface process
6. Spider
7. OFC voice coil
8. Checkered Polypropylene cone
9. Polypropylene dust cap 
10. Trim ring support
11. Front pure aluminum trim ring

Bass / midrange drivers utilizing polypropylene cones, big magnet structures (Φ90 in F and Φ80 in C/S) and heavy duty voice coils and coil formers for increased power handling, can play deep, precise and detailed bass performance and mid-range frequencies are very rich, spacious and sweet.

Pure aluminum trim ring helps further dispersion of played frequencies.



BASSREFLEX

BOM Bassreflex Omnidirectional Module - low-turbulence and high-velocity ports utilizing concave diffusers for increased dispersion of low frequencies. Ports are rubber coated for more luxurious look and to provide even better effect on a sound performance.


CROSSOVER
High quality, close-tolerance and precisely selected crossovers’ components and internal wires for absolute sound neutrality, high long-term power and reliability.


INTERNAL WIRING
TAGA Harmony utilizes high purity oxygen free copper OFC for internal wiring connecting crossovers with drivers assuring that incoming audio signals from receiver or amplifier will not lose any important details on the paths to drivers.


BINDING POSTS


High quality, gold-platted banana binding posts accepting raw speaker cables up to 10AWG and most popular types of connectors. 
High-end banana binding posts allowing bi-wiring are used in the floorstaning speakers for wider dispersions and spaciousness, higher sonic accuracy and more precise location.
The terminal box is rubber coated for more luxurious look.