TAGA Harmony

Platinum S-40 SE Print

Archived product
Awards and Reviews

The award-winning and highly acclaimed Platinum v.2 series  is the progenitor of our flagship Special Edition SE series.
But the main similarities between the SE series and the Platinum series are only the shapes of the enclosures.

The high class finishes along with all the components and technology either totally new or deeply revised. 

The TLIE (Taga Low Interference Enclosure) enclosures  in a beautiful natural rosewood wood veneer with a choice of clear gloss or clear matt piano lacquer finishes, or in high class real piano  (deep black and snowy white) are extremely rigid.

Design Surround/Bookshelf
2-way, 2 drivers
Bi-wiring, bi-amp
TLIE enclosure
Crossover points: 4.5kHz
Power handling 20 - 140W (recommended amplifier power)
105W RMS
Frequency response 40Hz - 40kHz
Bassreflex Front single
Impedance 4ohm
Sensitivity 88dB
High-frequency driver 25 mm (1”), TPTTD-I, TPAF, TTP
Bass-Midrange driver 133 mm (5.25"), TWCD
Dimensions (H x W x D) 35 x 23 x 24.2 cm
Weight 6.6 kg / pc.
Real wood veneer colours
Rosewood veneer with clear gloss piano lacquer Rosewood veneer with clear gloss piano lacquer
Rosewood veneer with clear matt piano lacquer Rosewood veneer with clear matt piano lacquer
Paint colours
Piano black Piano black



Figures show F-100 SE cabinet structure.

TLIE – Handcrafted Taga Low Interference Enclosures are made of high-quality 15mm thick MDF boards (12mm for Center speaker) with inside 12mm braces (floorstanding models) to increase stiffness and limit any unwanted speaker resonances.

Platinum F-100 SE v.2 and B-40 SE v.2: increased thickness of MDF : 25mm for the front panel (only F-100 SE v.2) and 18mm for the walls.

The shapes are perfectly crafted not only to look wonderful and modern but mainly to lower any unwanted vibrations, diffractions or turbulences, which can affect the sound performance.

Acoustical damping material used inside cabinets eliminates problem of internal standing waves and bass-reflex ports are uniquely designed to reduce distortions to minimum.

Floorstanding models sit on massive bases with spikes that provide stability and good isolation of speakers from the floor.

Platinum F-100 SE v.2: supplied  removable aluminum spike supports provide extra stability for the speakers and protect the floor from being scratched.

PIANO: Min. 1mm lacquer (more than 9 layers + 1 layer of the base coat) after burnishing.
WOOD: Min. 6 layers of paint + 1 layer of the base coat.



4. TPTTD Pure-titanium dome
5. Metal grill
6. TPAF Pure Aluminum Faceplate
8. Copper-Clad Aluminum Wire (CCAW) voice coil  with silver wiring
16. Black sponge 
17. Aluminum heatsink
18. Neodymium magnet

Platinum F-100 SE v.2 and B-40 SE v.2: the 3rd generation TPTTD-II (Taga Pure Titanium Tweeter Dome) utilizes a differently shaped and lighter titanium cone – it allows faster, more accurate movement of the dome reflecting in more detailed and airy sound. The tweeter is located much closer to the midrange than in the previous version to provide even better smoothness between high and mid frequencies.

Revised second generation TPTTD-I (Taga Pure Titanium Tweeter Dome) uses neodymium magnet for a higher efficiency and more precise and extended high-frequency response. Ferrofluid cooling and heavy duty CCAW and silver wiring voice coil help the tweeter to  bear high power and its performance is very accurate, clear, smooth and detailed.

TPAF (Taga Pure Aluminum Faceplate) helps further dispersion of high-frequencies.

TTP (Taga Top Plate) reduces standing waves effect and creates three-dimensional performance. In SE series TTP is rubber coated for more luxurious look and to provide even better effect on a sound performance.



1. T-YOKE / Pole piece                                                                           
2. Oversized ferrite magnet            
3. Top plate
4. Terminal
5. Aluminum injection-molded chassis with anti-oxidation surface process
6. Spider
7. Flat wire copper voice coil
8. TPACD Pure aluminum cone and rubber surround
9. Silver plastic ring
10. Pure aluminum bullet shaped phase plug

Platinum F-100 SE v.2: the 3rd generation TPACD-II (Taga Pure Aluminum cone Driver) - new adjustments and refinements along with revised magnet structure (oversized double magnet Φ 90 /  Φ 80) provide even higher power handling and  more rich, spacious and sweet mids.

Above figure shows F-100 SE, F-60 SE midrange driver.

Rigid and ultra-light upgraded, second generation TPACD-I Taga Pure Aluminum cone Driver (with bullet shaped phase plug and aluminum chassis, oversized Φ90 magnet – in F-100 SE and F-60 SE) with the butyl suspension can move very fast and frequently allowing mid-range frequencies to be very rich, spacious and sweet.

Heavy duty combo T-yoke, pure copper voice coil can stand high temperatures and power inputs. The still, bullet shaped phase plug (F-100 SE and F-60 SE) is to align the phase of the audio signal and to smooth the midrange frequency response.

New 3” TPACD-I midrange driver (C40PR only).


1. Additional magnet (F-100 SE, F-60 SE, B-40 SE only)
2. T-YOKE / Pole piece                                                                           
3. Oversized ferrite magnet            
4. Top plate
5. Terminal
6. Aluminum injection-molded chassis with anti-oxidation surface process
7. Spider
8. Flat wire copper voice coil
9. TWCD Woolen cone and rubber surround
10. Polyplopylene dust cap

Platinum F-100 SE v.2 and B-40 SE v.2:
the 2nd generation TWCD-I (Taga Woolen Cone Driver) with different composition of cone materials - the cone is lighter so can move faster generating better defined, more dynamic and faster bass performance.

The redesigned voice coil utilizing thicker and purer flat wire offers even higher power handling and longer operation time without increased temperature - we managed to keep its weight unchanged. Both woofers were moved a little up in order to change bass definition and its dispersion.

TWCD Taga Woolen Cone Driver  with the oversized double magnet Φ110 /  Φ100 magnet (F-100 SE, F-60 SE, B-40 SE), Φ90 (C-40PR SE) and Φ100 (S-40 SE) and heavy duty combo T-yoke, pure copper voice coil, allow for a high power handling as well as deep, precise and detailed bass performance (and detailed, rich and spacious midrange frequencies in mid-woofers models).


BOM Bassreflex Omnidirectional Module - low-turbulence and high-velocity ports utilizing concave diffusers for increased dispersion of low frequencies. Ports are rubber coated for more luxurious look and to provide even better effect on a sound performance.

Platinum F-100 SE v.2 and B-40 SE v.2: a longer port tube to offer punchier and deeper bass.


High quality, close-tolerance and precisely selected crossovers’ components and internal wires for absolute sound neutrality, high long-term power and reliability.

TAGA Harmony utilizes high quality of internal wiring connecting crossovers with drivers assuring that incoming audio signals from receiver or amplifier will not lose any important details on the paths to drivers.

Platinum F-100 SE v2 and B-40 SE v.2:
the dramatically upgraded crossover to meet new refinements and configuration of the drivers: more delicate and rich treble, better defined midranges and more dynamic bass.


All speakers (including center and surround speakers) use high quality, gold-plated banana binding posts accepting raw speaker cables up to 10AWG and most popular types of connectors. All speakers use upgraded, high-end banana binding posts allowing bi-wiring for wider dispersions and spaciousness, higher sonic accuracy and more precise location.

Platinum brochure 2019 v.1 Download
Disposal of the product Download
User manual (12-2022) Download